Sealed Air Instapak 901 Handheld Foam in Place Packaging System (900 Series)

Description

Brand: Sealed Air
Model: InstaPak 901 Foam in Place System
We are liquidators not actual users of the equipment.  This is no longer needed by one of my client's that I sell equipment for.  Not sure how long since last used.
Testing:  Limited.  I could only do a startup test as we have no foam agents and also don't know how to use it.  Plugged into 240V, 30A, 3-prong outlet.  Turned on switch.  "A" and "B" pumps began to make noise and the display lit up with the photo shown in photo 2.  Upon research on internet, it is evident that these can have clogging issues, especially in show line "A".  I had my technician disassemble the gun and put in a brand new maintenance kit.  The kit comes with two sets so there is one that will be included for you to use in future when you see fit.  There appeared to be no blockage in the line as there was red liquid that would come out both sides when hose end was disattached.  I assume it is working and ready to go.  It may need further tune up though as unfamiliar with it's exact working condition.
Included:
(1) 901 controller  (Serial #: 901-26083)
(1) "A" pump
(1) "B" pump
(1) "A" hose
(verified: hose line is not clogged)
(1) "B" hose
(verified: hose line is not clogged)
(1) "Hose hanger"
(1) "Dispensing gun"  (New "maintenance" kit installed which includes the "cartridge dispenser", (2) "filters" and (2) blue "grommets/gaskets", photo #10)
Electrical plug and receptacle type:  NEMA L6-30P & L6-30R