Sharp water trap for stock Highland Bagpipe Pipes

Description

Sharp Water Trap
Small Water Trap that fits on bottom of stock
Also Available from our eBay store
Highland Reeds Moisture Control System for Pipe Chanter
The Chanter Moisture Control System (CMCS) has been designed to reduce moisture from your pipe bag before it gets to your chanter reed. Air is taken through the gel filled cartridge section, on through the flexi-tube and connects to the chanter stock.
The Chanter Moisture Control System complements Highland Reed’s Drone Moisture Control System and offers the following benefits:
Keeps chanter reed drier so you can play longer
Gives consistency of air flow to the chanter
Non-bulky, lightweight system
Lies on the bottom of the bag
Easy to install, remove and maintain
Please note that the chanter and stock pictured are not included in the purchase.
Highland Reeds Moisture Control System
Moisture Control System (MCSII) reduces moisture before it hits your drone reeds. The Moisture Control System has been designed and developed with you, the piper, in mind. This is the most versatile system on the market because it is:
Lightweight
Sits at the top of the bag
Easy to adjust
Equipped with removable drone valves
It also offers the following benefits:
Keeps reeds drier so that your pipes stay in tune and you can play longer
No tonal change
Consistency of air pressure to drone
Easy to install, remove and maintain
Non-bulky, lightweight system
The removable drone valve has a flexible connector for connection to the drone stock. It also features a screw adjustable quick stop drone valve to regulate the air flow.
Drone valves are included within the system. These are removable if not needed, however they will regulate the air flow to the drones giving a steadier drone sound
Highland Reeds Moisture Control System Spare Set of 3 Yellow Cannister
These allow you to switch over a set in use to a dry set.
Valves and Rubber Cups not included.
Airtight Seasoning
Airtight Seasoning 250ml
Airtight Seasoning feeds and preserves leather pipe bags, absorbs moisture providing a rich resonant tone to the instrument. It guarantees to make any leather bag airtight, used by the top pipers and pipe bands in the world. The Choice of Champions!!
Tunetape
Tunetape chanter tape is purpose made for fine tuning notes on the pipe chanter. It offers minimal slippage with the correct amount of flexibility for accurate tuning. Tunetape is an agressive pressure sensitive tape
Pack of 10 Chanter Reed Bridles. These are essential for reed manipulation, they should be placed on the reed turning the elastic twice to ease the reed while maintaining stability
Cotton Brushes- Set of 4. Essential maintenance items. Regular cleaning of pipe bores will preserve both tone and the wood of any pipe.
Nylon Brushes- Set of 4. Essential maintenance items. Regular cleaning of pipe bores will preserve both tone and the wood of any pipe.
12pk Reed Absorb
Reed Absorbs - absorb moisture or saliva that collects at the bottom of the reed in your practice chanter.
Reed Absorbs - absorb moisture or saliva that collects at the bottom of the reed in your practice chanter. Can be used in practice chanters and pipes with polypenco stocks where moisture is a problem. Packs of 12 Absorbent disks per package. Most people will notice that on hemped part of the practice chanter, that there is usually a buildup of moisture after playing. This will help collect a large part of that moisture
Full Set Up Mooseture Control System
After several years of research and developement Moose Bagpipes have released their Mooseture Control System.
The Mooseture Control System gives pipers options for most moisture control solutions and has been designed to suit almost every conceivable set up.
The system can be purchased as a complete set up or just in part.
The Moose Drone Canister has 3 equal divisions ensuring absolutely equal and airtight airflow to each drone reed. The drone sections are filled with desiccant to offer totally dry airflow to the drone reeds.
The Moose Chanter/Blowpipe Canister can be connected to either the chanter stock, as a canister, or the blowpipe stock as a tube trap.
Both options offer a variety of choices in which way the piper wishes to run their bagpipe set-up. The canister has a dial to allow moist air from the bag to enter direct to the chanter reed as well as going through the desiccant in the canister. The dial can be moved easily from the outside of the bag to either shut off moisture or open up for more moisture. The canister has a small filter to protect the chanter reed from any dust particals. The amount of desiccant in this canister can be altered to suit as required or the desiccant can be replaced with a chamois (not supplied) if using as a tube trap from the blowpipe stock.
Both Moose Canisters can be easily removed at the tubes and have an easy removable lid for access. As the canisters are small and round in shape there is no need to ensure that they are level inside the pipe bag.
Highland reeds bottle water trap
Standard water trap for synthetic zip bag
Moose Tube Single
Moose Tubes are tubes for connection to the Mooseture Control System or other suitable moisture control sytems.
A Moose Tube takes seconds to fit and/or replace without any need to remove a stock from the bag!
It is incredibly easy to fit and replace by simply screwing securely into position in the bottom of each stock. The secure fitting is very similar to that used on the very popular Moose Valve.
Moose Tube features a large bore for efficient air delivery and are 100% Airtight when fitted.
Moose Tubes 3 Short and 1 Long with Connectors Set
Moose Tubes are tubes for connection to suitable moisture control sytems.
Moose Tubes take seconds to fit and/or replace without any need to remove a stock from the bag!
They are incredibly easy to fit and replace by simply screwing securely into position in the bottom of each stock. The secure fitting is very similar to that used on the very popular Moose Valve.
Moose Tubes feature a large bore for efficient air delivery and are 100% Airtight when fitted.
Moose Tubes come complete with Moose Connector.
Mooseture Control System Chanter/Blowpipe Canister
The Moose Chanter/Blowpipe Canister can be connected to either the chanter stock, as a canister, or the blowpipe stock as a tube trap.
Both options offer a variety of choices in which way the piper wishes to run their bagpipe set-up. The canister has a dial to allow moist air from the bag to enter direct to the chanter reed as well as going through the desiccant in the canister. The dial can be moved easily from the outside of the bag to either shut off moisture or open up for more moisture. The canister has a small filter to protect the chanter reed from any dust particals. The amount of desiccant in this canister can be altered to suit as required or the desiccant can be replaced with a chamois (not supplied) if using as a tube trap from the blowpipe stock.
Sharp Trap
Small Water Trap that fits on bottom of stock
Trap Dri Bagpipe Moisture Control Full Bottle Trap Set Up
Trap Dri is the rapidly growing moisture control device now played and recommended by the worlds top pipe bands and solo pipers.
The trap captures and retains moisture, preventing it being blown through the tube and into your bag by utilizing existing air pressure to create an airflow through the device that vacuums in moisture like magic, with pipers reporting on average 100% or more extra water pour off using the device.
4 point moisture capture makes this one the most efficient and stable forms of moisture control available. The selected elbow forms a pre water trap inside stock, Trapdri collects and holds excess condensing moisture, mid connector creates a further stop to any water allowing the bottle and cloth to do what it should which is dry the passing the air without being saturated with the excess moisture from the tube and being rendered useless after 10 - 20 mins playing.
Pipes remain in tune longer and can be played longer than before.
Trap Dri moisture control trap
The Trap Dri moisture control trap has been developed to prevent excess water escaping from your water trap and saturating your pipe bag by capturing and retaining moisture in the tube to be emptied. A revolution in moisture control.
The Trap Dri unit is fitted to your existing water trap tube and does not require a zip bag as it can slip through almost any split stock.
(Currently supports the standard tube with external diameter of appx 20 – 23mm used by majority of pipers or tube with internal diameter of 19mm, we will adapt this to fit any tube size or system soon, Full bottle trap set up’s available in shop for synthetic zip bags now).
With Trap Dri installed you will obtain a vastly reduced level of moisture into your bag.
Designed to be so unrestrictive to airflow you won’t even know it’s there and enhance your playing experience.
The trap works by collecting water which condenses inside your water trap tube and locks it inside the Trap Dri. Using a unique combination of air pressure and water flow to draw the water into the Trap Dri unit the water then becomes trapped and can’t make its way to the end of your tube where it can escape through the holes, resulting in better bagpipe performance.
Using Trap Dri will prolong the life of your sheepskin or other animal skin bag by drastically reducing the amount of water your bag has to absorb.
Using the Trap Dri in a synthetic bag by adapting it to fit your current system will greatly enhance the effectiveness of any existing moisture control by locking water away and preventing it running up the tube and soaking your moisture control system.
In either animal skin or synthetic bag you will obtain a steady balance of moisture meaning your pipes will remain in tune longer and can be played longer than before. “Spend your time practicing tunes, not tuning”.
The Trap Dri is virtually maintenance free. Simply remove every few weeks to clean.
Give your pipes the treatment they deserve by installing this revolutionary new trap which never loses its effectiveness during use.
Trap Dri Ultimate Bagpipe Moisture Control Water Drying System
Trap Dri is the rapidly growing moisture control device now played and recommended by the worlds top pipe bands and solo pipers.
4 point moisture capture makes this one the most efficient and stable forms of moisture control available. The selected elbow forms a pre water trap inside stock, Trapdri collects and holds excess condensing moisture, mid connector creates a further stop to any water allowing the bottle and cloth to do what it should which is dry the passing the air without being saturated with the excess moisture from the tube and being rendered useless after 10 - 20 mins playing.
Includes expansion kit with silica gel and standard tube ends allowing the increase/decrease of moisture as required. Turns the full bottle system into an all out moisture system for all playing conditions and can be easily changed by swapping rear section of the system at the mid joint. The silica gel attachment uses multi airflow to distribute air evenly across the silica gel to obtain maximum drying power resulting in superior performance.
Pipes remain in tune longer and can be played longer than before.
2PK Practice Chanter Soft Brushes
This set of 2 soft cotton brushes are specially designed for the practice chanter.
Soft brushes are used for wiping the inside bores. They can be used to wipe away condensation or clean away any build up.
They can also be used to apply Bore Oil to a blackwood practice chanter.
5PK Bagpipe Cleaning Brushes
This Brush Set contains 5 specially designed bagpipe cleaning brushes.
Each brush is designed to fit a certain bore or bores of the bagpipes.
3 medium bristle brushes for cleaning the bagpipes and 2 soft cotton brushes for drying and/or applying Bore Oil.
Bagpipe Metal Polish and Sealant by R.G. Hardie & Co
New R.G. Hardie & Co. Bagpipe Metal Polish and Sealant
It can be used on all types of bagpipe metal mounts including silver, nickel, antique nickel, brass and alloys.
Gives a lustrous shine and provides ongoing protection against atmospheric corrosion - but, unlike many metal polishes, it is non-abrasive and does not damage the metal or the wood.
It is available in 50ml bottles - only the smallest amount is required for perfect results.
We recommend the use of a fine microfiber cloth for application and final polishing.
Bees Wax
This bar of beeswax is for use with natural hemps. The addition of wax ensures the hemp will grip the wood or plastic in an effective manner, ensuring the hemping doesn't turn inside the stock
Black Waxed Hemp 50g
Black Waxed Hemp 50g. Ideal for forming seals around all joints on the pipes and especially on tuning slides
Blackwood Oil
The Piper Range Blackwood Oil. An essential, top quality, wood treatment to preserve and protect bagpipes. Helps prevent cracking, warping and damage caused by moisture and temperature.
We cannot recommend this product enough or over stress the importance of regular oiling and cleaning of pipe bores.
A well maintained pipe will last for decades The Pipers Range bore oil is the purest and finest available.
Bore Oil
Pipers Choice bore oil
This Bagpipe Bore Oil has a special preservative in it that helps to prevent cracking and warping of the bagpipe due to excessive dryness or over-absorption of moisture. The Bore Oil comes in a 1.25 oz. bottle and should be used occasionally to keep the internal bores of your wood bagpipes in good condition. This can also will enhance drone tone due to smoother bores. This oil can be applied with with cotton drone and chanter brushes, or a pull through swab for the stocks.
Cloth Brushes - set of 4
Cotton Brushes- Set of 4. Essential maintenance items. Regular cleaning of pipe bores will preserve both tone and the wood of any pipe.
Cloth Brushes - set of 4 from RG Hardie
Cotton Brushes- Set of 4. Essential maintenance items. Regular cleaning of pipe bores will preserve both tone and the wood of any pipe.
Deburring tool
The Pipe Chanter Deburring Tool is an ideal tool to sharpen notes on the pipe chanter. We advise undercutting the top of the holes only rather than changing the shape of the hole.
Modifications made using this tool is done so at the owners risk.
Deluxe Accessories Kit Bag
Kit bag to hold all you piping accessories.
**accessories pictured not included
Looking for a full accessories kit-then let us know which items you would like and we will get you a total discounted price when purchased with the kit bag.
Hobby Knife
The Hobby Knife is a very handy tool to have in the pipe case.
It can be used for everyday cutting jobs like hemp and tape but due to its razor sharp pointed blade it is ideal for undercutting chanter holes
Nylon Brushes - set of 4
Nylon Brushes- Set of 4. Essential maintenance items. Regular cleaning of pipe bores will preserve both tone and the wood of any pipe.
Nylon Brushes - set of 4 from RG Hardie
Nylon Brushes- Set of 4. Essential maintenance items. Regular cleaning of pipe bores will preserve both tone and the wood of any pipe.
Pipe Chanter Soft Brush
This conical, soft cotton brush is specially designed for the bagpipe pipe chanter.
Soft brushes are used for wiping the inside bores of the bagpipes. This brush can be used to wipe away condensation or clean away any build up.
It can also be used to apply Bore Oil.
This soft chanter brush can also be stored away inside the pipe chanter to prevent any build up of dust.
PTFE Tape
In order to tune your drones, the upper section of the drone must slide up and down (usually twisting at the same time) on the tuning pins using one hand.
This inexpensive PTFE tape is slippery and thin enough to apply over hemp to provide an airtight seal on joints and reduce friction thus allowing easier turning on the tuning pins.
Pull Through
The Pull Through is used to add Bore Oil to the bores of the bagpipes of simply for cleaning the bores from any build up.
Apply a small amount of the bore oil to the cloth and then drop the metal weight down each bore and pull it through.
Yellow Hemp 50g
Yellow Hemp 50g. Ideal for forming seals around all joints on the pipes and especially on tuning slides. This type is useful for accurately placing reeds in the reed seat.
Yellow Waxed Hemp 50g
Yellow Waxed Hemp 50g. Ideal for forming seals around all joints on the pipes and especially on tuning slides.
Bagpipe Drone Corks
3 Drone Corks. A simple and very useful way of temporarily stopping drones without the need for reed manipulation. Great for tuning, warming up and an essential part of a pipers kit.
Bagpipe Stock Corks
Set of 4 or 5 Stock Corks. Essential maintenance item allowing a piper to block the stocks to check the bag is airtight. They are also necessary for seasoning a leather pipe bag.
Can be ordered in sets of 4 or 5's
Blowpipe Valves 3pk
Made by Ayrshire Bagpipe Company
Blowpipe valves - made from non-perishable silicone rubber and copper staple.
Sold in packets of 3
Little Mac Valve
Little Mac Non Return Valve for the Highland Bagpipe
Keeping the bag full and providing a constant pressure for steady blowing is hard enough when playing your bagpipe, so you don't need the added worry and aggravation of a wasteful air leak through your mouthpiece. This can be 100 per cent eliminated when you use the "Little Mac" Valve. You will benefit in the following ways; does not restrict blowing; an instant airtight seal; little or no maintenance; will not dry or wear out; top quality and durability
Moose Valve
The Moose Valve is the Worlds first bagpipe non restrictive valve suitable for every bagpipe set up since the original flap valve. The Moose Valve offers 100% confidence for every piper combined with non restrictive air flow and an efficient water trap.
The Moose valve is the latest precision engineered product to replace all existing blowpipe and stock bagpipe valves and here are 10 good reasons why every piper should use a Moose Valve.
100% Airtight
Super Efficient Large Sized Bore
Very Easy to Fit and Remove
Ideal for Any Bag Set Up
Fully Adjustable from 3/4" to 7/8"
Effective Spit Trap
Fits Internal Tapered Stocks
Secures Directly into Bore of Stock
No Drilling or Reeming Required
No Hemping Required
Pipers Choice Rubber Blowpipe Valve with Tie-in string
This rubber valve requires no modification to your existing blowpipe. It is a device that by design stays closed giving a complete seal with no drying out. Although these valves have a long life, it is good to replace them every once in a while.
Supplied with Tie-in String.
Rubber Blowpipe Valve
The classic "clack" Valve. A proper seal on the blowpipe is a great help in creating a stable tone and frees a piper to concentrate on fingering rather than blowing
Yellow Drone Valves
The tension on the quick stop drone valve is screw adjustable giving greater accuracy and once properly installed to suit your blowing strength the Quick Stop Drone Valves should ensure that you strike your bagpipes in without difficulty, provide a steady flow of air to your drone reeds and close tightly when pressure is released to ensure a clean 'cut-off'.
Black PVC tape
Ideal for taping chanters
Piper Third Hand
Piper's third hand tuning aid
This product helps with tuning by covering the holes of the bottom hand to sound low A.
Just tune your drones and remove it again to start to play.
Polyester High Temperature Tape
High Temperature Polyester Tape for use on pipe chanters and practice chanters for tuning
Polyester Tape is Easily Removed after Use.
Silicone Based Adhesive Leaves No Residue after Removal.
Comes in rolls 10mm wide by 33m Long. Perfect for tuning between the holes.
Rise is minimal ,so less noticeable to the touch.
Premium Pipe Chanter Tape
Regularly changing chanter tape will keep the chanter ready for quick and accurate tuning which is essential for achieving the best possible sound.
This premium tape sticks to the chanter, holding it's position well without leaving a residue. The thickness and width of the tape ensure it doesn't interfere with fingerwork
Thumb Stop
Thumb Stop - The thumb is a must for every beginning piper. It is used to train the thumb on your right hand to stay directly behind the middle finger.
This will help you have the proper finger placement allowing you to play burls, taorluaths, and grace notes properly. As well as being good for a beginner, they are great for an existing player who wants to work on their technique.
Tunetape
Tunetape chanter tape is purpose made for fine tuning notes on the pipe chanter. It offers minimal slippage with the correct amount of flexibility for accurate tuning. Tunetape is an agressive pressure sensitive tape with superior resistance to heat, moisture, humidity and cold.
Each roll of Tunetape is 5 metres * 11mm, very thin and hardly felt on the chanter. It's transparent and hardly noticed. Tunetape can be reapplied many times, leaves minimal residue and won't damage your pipe chanter or clog the holes.