System Packaging SP-600-18-3D, Cold Seal Packaging

Description

Machine Specification
This machine uses two Rolls of Cold Seal Material to make the protective pouch.
The lower web of the material runs over the infeed table and carries the product into the sealing portion.
This is where the Upper Roll of material joins the product to form the protective pouch.
The end seals and length cutoff are done simultaneously in the sealing head of the system.
The machine uses pre set length counters to regulate the package size.
Machine operation and setup are done thru the touch screen controller.
This allows the operator to make adjustments quickly and easily.
The system is available in 18" and 36" Wide Models
The maximum Width and Height thru the machine varies upon Model
The 600-18 has a 5" High Package Capability
While the 600-36 has an 8" High Package Capability
Length thru the system is only limited by what can be supported on the Infeed Table
Most all cold seal materials can be run on the model 600, these include: Corrugated; Polyethylene; Kraft Papers; Foams and Bubble
Fully Funtional:
https://youtu.be/9KK6axULOzg